Playback the image

The image will appear, and the <f(> icon will appear on the upper left to indicate that the camera is connected to a printer.

The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct.

When connecting the camera to the printer, do not use any cable other than the interface cable provided.

If there is a long beeping sound in step 5, it indicates a problem with the PictBridge printer. To find out what's wrong, do the following: Press the <E> button to playback the image and follow the steps below.

2. On the print setting screen, select [Print].

The error message will be displayed on the LCD monitor. (p.144)

0 • If you use a battery to power the camera, make sure it is fully charged. With a fully charged battery, printing up to about 7 hours is possible.

• Before disconnecting the cable, turn off the camera and printer first. Pull out the cable while holding the plug, not the cord.

• For direct printing, using AC Adapter Kit ACK-E4 (optional) to power the camera is recommended.

Was this article helpful?

0 0

Post a comment