Recording media:

Image size: Compatible lenses:

Lens mount:

• Imaging Element



Aspect ratio: Color filter system: Low-pass filter:

• Recording System

Recording format: Image format: RAW+JPEG

simultaneous recording: File size:

File numbering: Color space: Processing parameters:


Digital, single-lens reflex, AF/AE camera with built-in flash

Type I or II CF card

* Compatible with Microdrive and 2GB or larger CF cards 22.5 x 15.0mm

Canon EF lenses (including EF-S lenses) (35mm-equivalent focal length is equal to approx.1.6 times the marked focal length.) Canon EF mount

High-sensitivity, high-resolution, large single-plate CMOS sensor

Effective pixels: Approx. 8.20 megapixels Total pixels: Approx. 8.50 megapixels

RGB primary color filter

Located in front of the image sensor, non-removable

Design rule for Camera File System 2.0: JPEG and RAW JPEG, RAW (12bit)


(1) Large/Fine: Approx. 3.6MB (3504 x 2336 pixels)

(2) Large/Normal: Approx. 1.8MB (3504 x 2336 pixels)

(3) Medium/Fine: Approx. 2.2MB (2544 x 1696 pixels)

(4) Medium/Normal: Approx. 1.1MB (2544 x 1696 pixels)

(5) Small/Fine: Approx. 1.2MB (1728 x 1152 pixels)

(6) Small/Normal: Approx. 0.6MB (1728 x 1152 pixels)

* Exact file sizes depend on the subject, ISO speed, processing parameters, etc.

Consecutive numbering, auto reset sRGB, Adobe RGB

Parameter 1 and 2, set 1 to 3 (three custom processing parameters), B/W

USB 2.0 Hi-Speed (Normal/PTP selectable) Video output (NTSC/PAL)

•White Balance


Auto white balance: Color temperature correction:

Auto, daylight, shade, cloudy, tungsten, white fluorescent light, flash, custom, color temperature setting

Auto white balance with the image sensor

White balance correction:

±9 stops In full-stop increments

White balance bracketing:

±3 stops In full-stop increments

* Blue/amber bias or magenta/green bias possible

Color temperature

Information transmission: Provided

Type: Coverage: Magnification: Eyepoint:

Built-in dioptric adjustment: Focusing screen: Mirror:

Vlewfinder Information:

Eye-level pentaprism Vertical/Horizontal 95% 0.9x (-1 diopter with 50mm lens at Infinity) 20 mm

-3.0 - +1.0 diopter Fixed, precision matte Quick-return half mirror

(Transmlssion:reflection ratio of 40:60, no mirror cut-off with EF 600mm f/4 or shorter lens) AF Information (AF points, focus confirmation light), exposure Information (shutter speed, aperture value, AE lock, exposure level, partial metering circle, exposure warning), flash information (flash ready, red-eye reduction lamp on, high-speed sync, FE lock, flash exposure compensation), white balance correction, maximum burst, CF card Information Enabled with depth-of-fleld preview button

TTL-CT-SIR with a CMOS sensor (TTL secondary Image-registration, phase detection) 9 AF points

EV -0.5 - 18 (at 20°C/68°F, ISO 100) One-Shot AF, Al Servo AF, Al Focus AF, Manual focusing (MF)

Auto, manual

Selected AF point display: Superimposed In viewflnder and indicated on LCD panel

Depth-of-field preview:


AF points: Metering range: Focus modes:

AF point selection:

AF-assist beam:

• Exposure Control

Metering modes:

Metering range: Exposure control:

ISO speed:

Exposure compensation:

AE lock:


Shutter speeds:

Shutter release: Self-timer: Remote control:


Flash metering: Guide No.: Recycle time: Flash-ready indicator: Flash coverage: FE lock:

Flash exposure compensation:

Built-in flash fires intermittently

Effective range: Approx. 4.0m/13.1ft. at center, approx.

3.5m/11,5ft. at periphery

35-zoneTTLfull aperture metering

• Evaluative metering (linkable to any AF point)

• Partial metering (approx. 9% of viewfinder at center)

• Centerweighted Average Metering

EV 1-20 (at 20°C/68°F with 50mm f/1.4 lens, ISO 100) Program AE (Full Auto, Portrait, Landscape, Close-up, Sports, Night Portrait, Flash Off, Program), shutter-priority AE, aperture-priority AE, depth-of-field AE, manual exposure, E-TTL II autoflash Basic Zone modes: Automatically set (ISO 100-400) Creative Zone modes: ISO 100, 200, 400, 800, 1600, extendable to ISO 3200.

Manual: ±2 stops in 1/3- or 1/2-stop increments (can be combined with AEB) AEB: ±2 stops in 1/3- or 1/2-stop increments Auto: Applied in One-Shot AF mode with evaluative metering when focus is achieved. Manual: By AE lock button In all metering modes.

Electronically-controlled, focal-plane shutter

1/8000 to 30 sec. (1/3- and 1/2-stop increments), bulb

X-sync at 1/250 sec.

Soft-touch electromagnetic release

10-sec. delay

Remote control with N3 type terminal

Retractable, auto pop-up flash E-TTL II autoflash 13/43 (ISO 100, in meters/feet) Approx. 3 sec.

Flash-ready icon lights in viewfinder 17mm lens focal length covered Provided

• External Speedllte

EOS-dedicated Speedlite: E-TTL II autoflash with EX-series Speedlite

PC terminal: Zooming to match lens focal length:

Drive modes: Continuous: Max. burst:


Monitor size:



Brightness adjustment: Interface languages:

• Image Playback

Display format:

Highlight warning:

Provided Provided

Single, continuous, and Self-timer (10 sec.) Max. 5 shots per sec.

JPEG* (Large/Fine): Approx. 20, RAW: Approx. 6 * Varies depending on the subject, ISO speed, processing parameters, CF card, etc.

TFT color liquid-crystal monitor 1.8 in.

Approx. 118,000

100% with respect to the effective pixels Five levels provided 12

Single image, shooting information, 9-image index, magnified view (Approx. 1,5x - 10x), autoplay, image rotation, and jump

In the shooting information mode, any overexposed highlight areas with no image infomation will blink.

> Image Protection and Erase

Protect: Erase:

• Direct Printing

Compatible printers:

Printable images:

• Customization

Custom Functions:

Single images can be erase-protected or not.

One image or all images in the CF card can be erased

(except protected images).

CP Direct, Bubble Jet Direct, and PictBridge-compatible printers

JPEG images (DPOF printing possible) 18 Custom Functions with 50 settings


Battery lite:

One Battery Pack BP-511 A, BP-514, BP-511, or BP-512.

* AC power can also be supplied with the DC Coupler.

* With Battery Grip BG-E2, size-AA batteries can be used.



Shooting Conditions

No Flash

50% Flash Use

At 20°C/68°F

Approx. 1000

Approx. 700

At 0°C / 32°F

Approx. 750

Approx. 550

* The above figures apply when a fully-charged Battery Pack BP-511A is used.

* The above figures apply when a fully-charged Battery Pack BP-511A is used.

Battery check: Automatic

Power saving: Provided. Power turns off after 1, 2, 4, 8, 15, or 30 min.

Date/Time battery: One CR2016 lithium battery

• Dimensions and Weight

Dimensions: 144 (W) x 105.5 (H) x 71.5 (D) mm / 5.7 x 4.2 x 2.8 in.

• Operation Environment

Working temperature range: 0°C- 40°C / 32°F - 104°F Working humidity: 85% or less

• Battery Charger CG-580

Compatible battery: Battery Pack BP-511 A, BP-514, BP-511, or BP-512. Recharging time: BP-511A, BP-514: Approx. 100 min.

BP-511, BP-512: Approx. 90 min. Rated input: AC 100 - 240 V

Rated output: DC 8.4 V

Working temperature range: 0°C - 40°C / 32°F - 104°F Working humidity: 85% or less Dimensions (W x H x D): 91 x 67 x 31 mm / 3.6 x 2.6 x 1.2 in Weight: 115g/4.0oz

• Battery Charger CB-5L

Compatible battery: Battery Pack BP-511 A, BP-514, BP-511, or BP-512.

Power cord length: Approx. 1.8 m / 5.9 ft. Recharging time: BP-511A, BP-514: Approx. 100 min.

BP-511, BP-512: Approx. 90 min. Rated Input: AC 100 - 240 V

Rated output: DC 8.4 V

Working temperature range: 0°C - 40°C / 32°F - 104°F Working humidity: 85% or lower

Dimensions (W x H x D): 91 x 67 x 32.3 mm / 3.6 x 2.6 x 1.3 In Weight: 105 g / 3.7 oz (excluding power cord)

All the specifications above are based on Canon's testing standards. The camera's specifications and physical appearance are subject to change without notice.

Digital Camera Model DS126061 Systems

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note:This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help. The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516)328-5600

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment