Setting the AF Metering and Drive Modes

By selecting a suitable AF point, you can shoot with autofocus while framing the subject as desired. You can also set the AF mode to suit the subject or obtain the desired effect. Evaluative, partial, and center-weighted average metering modes are provided. Single, continuous, and self-timer drive modes are provided. Select the metering mode that suits the subject or your photographic intention. The asterisk M on the right of the page title indicates that the...

Shooting Information Display

Image Flash exposure compensation amount Shooting time Shooting date Shutter speed Images recorded Total images recorded Aperture Image protect Exposure compensation amount File No. Histogram ISO speed Color space Metering mode Shooting mode WB correction White balance File No. Histogram ISO speed Color space Metering mode Shooting mode WB correction White balance A histogram is a graph indicating the image's brightness distribution. The horizontal axis indicates the brightness level (darker on...

Display the camera settings

The current camera settings will To turn off the settings display, press the lt I gt button again. WB correction p.59 WB bracketing p.60 Color space p.62 Processing parameters p.63 Image review time p.104 Auto rotate display p.105 ISO speed p.55 CF card remaining capacity Flash exposure compensation p.100 ES For details on the image info during playback, see Shooting Information Display p.108 .

T Setting the Paper Size

I x 13 cm 53 Ban 10 14.Sen CreditCard M Press the lt ,V gt key to select the size of the paper loaded in the printer, then press lt gt . Press the lt ,V gt key to select the type of the paper loaded in the printer, then press lt gt . The Page Layout screen will appear. If you are using a Canon PIXMA DS BJ printer with Canon paper, set the respective paper type as follows If you are using a non-Canon printer, refer to the printer's instruction manual.

Builtin Flash Range

With EF-S18-55mm f 3.5-5.6 ll m ft With EF-S18-55mm f 3.5-5.6 ll m ft With EF-S17-85mm f 4-5.6 IS USM m ft Use the built-in flash at least 1 m 3.3 ft away from the subject. Closer distances will cause the lens barrel to partially obstruct the flash. When using the built-in flash, detach any hood attahed to the lens. A lens hood will partially obstruct the flash. A super telephoto lens or fast, large-aperture lens may partially obstruct the built-in flash coverage. In such a case, using an...

AF Selecting the AF Mode

The AF mode is the autofocusing operation method. Three AF modes are provided. One-Shot AF is suited for still subjects, while AI Servo AF is for moving subjects. And AI Focus AF switches from One-Shot AF to AI Servo AF automatically if the still subject starts moving. In the Basic Zone modes, the optimum AF mode is set automatically.

Jump forward or back

To quit the image jump, press the lt JUMP gt button. The jump bar will disappear. Jumping during the single image or image with shooting information display Press the lt Y gt key to jump back by 10 images 100 images. Or press the lt gt key to jump forward by 10 images 100 images. Jump by dj date You can jump to a picture taken on a specific date. If there are multiple pictures taken on the same date, the display will jump to the first picture taken on that date. Press the lt Y gt key to jump...

Pressing the shutter button halfway activates the autofocus and achieves focus once

The dot lt gt inside the AF point achieving focus flashes briefly in red. Also, the focus confirmation light lt gt in the viewfinder lights. With evaluative metering, the exposure setting shutter speed and aperture will also be set when focus is achieved. The exposure setting and focus will be locked as long as the shutter button is pressed halfway. p.75 You can then recompose the shot while retaining the exposure setting and point of focus. E3 If focus cannot be achieved, the focus...

Av Aperture Priority AE

In this mode, you set the desired aperture and the camera sets the shutter speed automatically to suit the subject brightness. This is called aperture-priority AE. A larger aperture opening lower f number will result in a blurred background ideal for portraits. This occurs because a lower f number decreases the depth of field range of acceptable focus . On the other hand, a smaller aperture opening higher f number will make more of the foreground and background fall within acceptable focus. A...

Format the CF card

Press the key to select OK , The CF card will be formatted initialized . When the formatting is completed, the menu will reappear. A non-Canon CF card or a CF card formatted with another camera or personal computer might not work properly with the camera. If this happens, format the card with the camera first. Then it might work with the camera. The CF card's capacity displayed on the Format screen may be lower than the capacity indicated on the card. Err CF CF error displayed on the LCD panel...

Set the desired aperture value

Hold down the lt AO gt and turn the lt 6 gt dial. Standard exposure index Focus the subject. Press the shutter button halfway. The exposure setting will be Exposure level mark displayed on the LCD panel and in The exposure level icon lt l gt shows you how far you are from the standard exposure level. Check the exposure level and set the _I t desired shutter speed and aperture To set it to the standard exposure level, set a slower shutter speed or a larger aperture opening. To set it to the...

Protect the image

Press the key to select the When an image is protected, the lt K gt icon will appear below the image. To cancel the image protection, press the lt gt button again. The lt K gt icon will disappear. To protect another image, repeat step 2. To exit the Protect screen and return to the menu, press the lt MENU gt button. 51 Once an image is protected, it cannot be erased by the camera's Erase function. To erase a protected image, you must first cancel the protection. If you erase all the images...

With EXseries Speedlites

An EOS-dedicated, EX-series Speedlite optional makes flash photography as easy as normal shooting. You can easily do the flash operations below. For detailed procedures, see the Speedlite's instruction manual. E-TTL II is a new autoflash exposure system incorporating improved flash exposure control and lens focusing distance information, making it more precise than the previous E-TTL evaluative flash metering with preflash system. The camera can execute E-TTL II autoflash with any EX-series...

Select the AF mode

Press the lt ,V gt key to select the desired setting, then press lt gt . When you press the shutter button halfway, the LCD panel will display an arrow lt gt next to the current AF mode. Although you can still set the AF mode while the lens focus mode switch is set to lt MF gt , the AF mode will not take effect during manual focus. If an Extender optional is attached and the maximum aperture of the lens is f 5.6 or smaller, AF will not be possible. For details, see the Extender's instructions....

Image Settings

This chapter explains the digital image settings for the image-recording quality, ISO speed, white balance, color space, and processing parameters. For Basic Zone modes, only the image-recording quality except RAW and RAW 7L , file numbering, and camera setting check will apply in this chapter. The asterisk M on the right of the page title indicates that the respective feature is available only in Creative Zone modes P, Tv, Av, M, A-DEP . The 7L 8L 7M 8M 7S 8S modes record the image in the...

Fn Shutter buttonAE lock button

Convenient when you want to focus and meter separately. Press the lt A gt button to autofocus and press the shutter button halfway to attain AE lock. 2 AF AF lock, no AE lock In the AI Servo AF mode, you can press the lt A gt button to stop the AF operation momentarily. This prevents the AF from being thrown off by any obstacle passing between the camera and subject. The exposure is set at the moment the picture is taken. 3 AE AF, no AE lock This is useful for subjects which keep moving and...

Direct Printing from the Camera

You can connect the camera directly to a printer and print out the images in the CF card. This chapter explains how to print your digital camera photos with a printer capable of direct printing via lt W gt PictBridge or Canon's own lt A gt CP Direct or lt S gt Bubble Jet Direct standard. W PictBridge bd s Jt WPictBridge W PictBridge bd s Jt WPictBridge Page 125 - 128 I Page 125 - 128 I Page 132 - 134 I Page 125 - 128

Rotate the image

Press the key to select the Each time you press lt gt , the image will rotate clockwise. To rotate another image, repeat step 2. To exit the Rotate screen and return to the menu, press the lt MENU gt button. Protect I Flo t te Print order Auto play flevis time 51 If you have set C Auto rotate to On p.105 before taking the vertical shots, you need not rotate the image as described above. You can rotate the image even after you change the display format to shooting info display, magnified view,...

Take the picture

The lt A-DEP gt mode cannot be used if the lens' focus mode switch is set to lt MF gt . The result will be the same as using the lt P gt mode. If the 30 shutter speed blinks, it indicates that the subject is too dark. Increase the ISO speed. If the 4000 shutter speed blinks, it indicates that the subject is too bright. Decrease the ISO speed. If the aperture value blinks, it indicates that the exposure level is correct but the desired depth of field cannot be obtained. Either use a wide-angle...

Using the Builtin Flash in the Creative Zone

Regardless of the light level, you can press the lt D gt button to pop-up and fire the built-in flash whenever desired. P For fully automatic flash photography. The shutter speed 1 60 sec. - 1 200 sec. and aperture value are set automatically, just as in lt 0 gt Full Auto mode. Tv Enables you to set the desired shutter speed 30 sec. - 1 200 sec. . The camera then automatically sets the flash aperture value to obtain the proper exposure at the shutter speed you have set. Av Enables you to set...

Filter Effects

The same effect as using filters with black-and-white film can be obtained with digital images. A color can be brightened by using a filter having a similar or same color. At the same time, the complementary colors will be darkened. Normal black-and-white image with no filter effects. The blue sky will look more natural, and the white clouds will look more crisp. The blue sky will look slightly darker. The sunset will look more brilliant. The blue sky will look quite dark. Fall leaves will look...

Diagram Of A Canon Eos 350d

Canon 350d Manual Pdf

STE2 220EX 420EX 580EX Macro Ring Lite Macro Twin Lite MR-14EX MT-24EX STE2 220EX 420EX 580EX Macro Ring Lite Macro Twin Lite MR-14EX MT-24EX Battery Magazine BGM-E3L for two NB-2LH battery packs Battery Magazine BGM-E3L for two NB-2LH battery packs Home Edition Professional PC card slot I Windows 2000 Professional Windows ME Windows 98 Second Edition Mac OS X 10.1.5-10.3 Mac OS 9.0-9.2 Software Instruction Manual PDF Software Instruction Manual PDF

Set the AEB amount

Press the key to set the AEB amount, then press lt gt . When you press the shutter button halfway, the lt h gt icon and AEB amount will appear on the LCD panel. Standard exposure Decreased exposure Increased exposure The three bracketed shots will be exposed in the following sequence standard exposure, decreased exposure, and increased exposure. As shown on the left, the respective bracketing amount will be displayed as each bracketed shot is taken. The current drive mode p.78 will be used for...

W Printing with Pict Bridge

The setting options will differ depending on the printer. Some settings might be disabled. For details, refer to your printer's instruction manual. Check that the lt W gt icon is displayed on the upper left of the LCD monitor. Press the key to select the image to be printed. The Print setting screen will appear. When the lamp lights in blue, press it to start printing according to the current print settings p.123 . Set the date imprinting to on or off. Set the printing effects. Set the quantity...

Canceling AEB

Flash exp coup white balance WB SHIFT BKT Custom VB Color space Parameters Follow steps 1 and 2 to set the AEB amount to AEB will also be canceled automatically if you turn the power switch to lt OFF gt , change lenses, obtain flash-ready, replace the battery, or replace the CF card. AEB cannot be used with flash or bulb exposures. ES If the drive mode is set to continuous O , the three bracketed shots will be taken continuously and then the shooting will stop automatically. If the drive mode...

Auto Exposure Bracketing AEB

By changing the shutter speed or aperture automatically, the camera can bracket the exposure up to 2 stops in 1 3-stop increments for three successive shots. This is called Auto Exposure Bracketing AEB . By changing the shutter speed or aperture automatically, the camera can bracket the exposure up to 2 stops in 1 3-stop increments for three successive shots. This is called Auto Exposure Bracketing AEB . Flash bkp cono Vjhit balance M SHIFT BKT custom HB Color space Parameters

Setting the Processing Parameters

The image you capture can be processed automatically by the camera in accordance with the parameter settings you set five levels each for Contrast , Sharpness , Saturation , and Color tone . You can register and save up to three sets of processing parameters. Parameters Contrast Sharpness Saturation Color tone Parameters Contrast Sharpness Saturation Color tone

Fn Shutter curtain sync

0 1st-curtain sync. 1 2nd-curtain sync. When a slow shutter speed is set, you can capture a light trail following the subject.The flash fires right before the shutter closes. This Custom Function can be used to obtain 2nd-curtain sync effects even with EX-series Speedlites which do not provide 2nd-curtain sync. If the EX-series Speedlite has this feature, it will override this Custom Function. o When 2nd-curtain sync is used, a preflash will be fired for flash metering control right after you...

Selecting the Processing Parameters

The image you capture can be processed internally by the camera to look more vivid and sharp or more subdued. The processing parameters can be set according to the preset Parameter 1 or Parameter 2 or to Set 1, 2, or 3 that you can set yourself. There is also a B W parameter for black-and-white photos. In the Basic Zone modes, Parameter 1 will be set automatically.

Auto reset

Each time you replace the CF card, the file numbering will be reset to the first file number 100-0001 . Since the file number starts from 0001 in each CF card, you can organize images according to CF card. Note that if the replacement CF card already contains images, the file numbering will start after the highest file number in that CF card. File numbering after changing the CF card When folder No. 999 is created, Folder number full will appear on the LCD monitor. If file No. 9999 is created,...