The date/time (back-up) battery maintains the camera's date and time. Its service life is about 5 years. If the date/time is reset when the battery is replaced, replace the back-up battery with a new CR2016 lithium battery as described below.
The date/time setting will also be reset, so be sure to set the correct date/time.
1 Set the power switch to <OFF>.
2 Remove the battery.
3 Take off the battery holder.
Replace the battery.
• Make sure the battery is in the proper + - orientation.
Insert the battery holder.
• Then load the battery and close the cover.
For the date/time battery, be sure to use a CR2016 lithium battery.
Was this article helpful?