Cleaning the CMOS Imaging Element

The imaging element corresponds to the film in a film camera. If dirt or foreign matter gets on this imaging element, black spots may be recorded on the corresponding part of the image. If this happens, use the procedure below to clean the imaging element.

Because the imaging element is very sensitive, we strongly recommend that you have the cleaning done by Canon service representatives.

When cleaning the imaging element, always connect the EOS D30 camera to a household power outlet using the DC coupler. If you try to clean the imaging element while the battery pack is installed in the camera, the cleaning warning message " will blink on the LCD panel and you will not be able to clean the imaging element.

Before you start cleaning, remove the lens (^30), attach the DC coupler (^29), and set the Main Switch to (ON).

UtD Hi lentil Sra-U-id tefc/Tira ll/ig/'W 11:53 h:J< "ltIi; ■ jii= ConlLUDUi LanSIHgE Erg]l£fi Ulfen irt't", NIK rcn-a:_

_lt m upuura re-He nhfttn

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment