Error Codes

Photography Masterclass

Photography Masterclass Online Course

Get Instant Access

Error No. If there is a problem with the camera, an ^^^^^ error message will appear. Follow the onI screen instructions.

Communications between the camera and lens is faulty, Clean the lens contacts,

Countermeasures

Countermeasures

No.

Error Message & Solution

01

Communications between the camera and lens is faulty. Clean the lens contacts.

Clean the electrical contacts on the camera and lens and use a Canon lens (p.13, 16).

02

Card cannot be accessed. Reinsert/change card or format card with camera.

Remove and insert the card again, replace the card, or format the card (p.31, 42).

04

Cannot save images because card is full. Replace card.

Replace the card, erase unnecessary images, or format the card (p.31, 171, 42).

05

The built-in flash could not be raised. Turn the camera off and on again.

Operate the power switch (p.27).

06

Sensor cleaning is not possible. Turn the camera off and on again.

Operate the power switch (p.27).

10, 20, 30, 40, 50, 60, 70, 80

Shooting is not possible due to an error. Turn the camera off and on again or re-install the battery.

Operate the power switch, remove and install the battery pack again, or use a Canon lens (p.27, 26)

* If the error still persists, write down the error No. and contact your nearest Canon Service Center.

* If the error still persists, write down the error No. and contact your nearest Canon Service Center.

Was this article helpful?

0 0

Responses

  • julie
    How to fix error 70 shooting is not possible due to an error?
    8 years ago
  • Diamond Underhill
    How to fix error 06 on canon 550d?
    8 years ago
  • filomena
    How to fix when rebel t2i says error 50?
    8 years ago
  • Klaudia
    What is the meaning of error code 10,20,30,40,50,60,70 in canon 500d?
    8 years ago
  • grace
    What brings error code on canon 550d?
    3 years ago

Post a comment