1. Press the Menu button, then use the Main dial to get to the Custom Functions menu (A).
2. Using the Cross keys, select C. Fn II: Image 5, and then press the Set button (B). The default setting is Standard but you may require the Strong setting for really high ISOs.
3. Press the Menu button to return to the Custom Functions menu and then select screen 4, Long exp. noise reduction. Press the Set button to change the options. The default setting is Auto, which will handle most scenarios. If you know you are going to be making extremely long exposures you should probably go ahead and set it to On (C).
PI M PIETIES El FE
| Custom Functlons(C.Fri) Copyright information Clear settings Firmware Ver. 1.0.6
High ISO speed noise reduct'n OlStandard
12:Strong 3:Disable r Fn IT' 1 2 3 4 5 6 7 B 9 10 1112 urn ii. 010200000000
Long exp. noise reduction
Was this article helpful?
Although we usually tend to think of the digital camera as the best thing since sliced bread, there are both pros and cons with its use. Nothing is available on the market that does not have both a good and a bad side, but the key is to weigh the good against the bad in order to come up with the best of both worlds.